PROJANTA | SHINE X 5 LTR | 2003
- Metallised emulsion floor polish for extreme strength and durability
- Easier removability compared with many high-durability polishes
- Non-yellowing polymer film for light-coloured floors
- Deep shine with excellent slip resistance
ProJanta Shine 5L (2003) is a metallised emulsion floor polish delivering extreme strength and durability with ease of removability.
MPN: 365
Product Code: 2402
MPN: 100834247
Product Code: 2404
MPN: 7518106
Product Code: 2405
MPN: 108
Product Code: 2012
Product Code: 2887
ProJanta Shine 5L (2003) is a metallised emulsion floor polish delivering extreme strength and durability with ease of removability. It forms a non-yellowing polymer film that won’t discolour even light floors, producing a deep shine with excellent slip resistance and strong response to spray burnishing. Apply only to a clean, grease-free floor—strip old polish with an alkaline stripper, rinse thoroughly, and allow to dry. Apply thin, even coats with a lint-free mop or applicator; buff as required to enhance gloss.
Instructions for use
- Thoroughly clean the floor and strip previous polish layers with an alkaline stripper
- Rinse thoroughly with clean water and allow the floor to dry fully
- Apply a thin, even coat using a polish applicator or clean lint-free mop
- Allow to dry (approximately 30 minutes), then apply a second thin coat
- Burnish/buff as required to enhance gloss
- Apply a third coat if a higher gloss level is required
SHINE
Please be aware pH values may be approximated on a scale between two values, this table uses the most acidic value provided by manufacturer. Please refer to the provided Safety Data Sheet, or specification table below for approximate pH values. For diluted values, please refer to the SDS/COSHH document below.
Health & safety
- Ingestion: Do not induce vomiting. Rinse mouth and drink plenty of water (200–300ml). Do not give anything to drink if unconscious. Get medical attention immediately.
- Skin contact: Wash thoroughly with soap and water. Get medical attention if irritation persists after washing.
- Eye contact: Flush with plenty of water for up to 15 minutes. Remove contact lenses and hold eyes open. Get medical attention if discomfort continues.
- PPE required: Eye goggles and gloves
Storage
- Store in a well-ventilated place
Where to use / Suitable for
- Maintaining high-gloss protection on sealed hard floors in commercial environments
- Sites using spray burnishing to maintain gloss and durability
- Floors where a non-yellowing polish is required for light finishes
| Brand | ProJanta |
|---|---|
| Colour | White |
| Litreage | 5 LTR |
| Product Weight | 1 |