PROJANTA | SHINE WET LOOK POLISH X 5 LTR | 2002
- High solids polymer sealer and polish for a wet look finish
- Deep shine with excellent slip resistance
- Thermoplastic polymer gets tougher and shinier with repeated buffing
- Appearance: white; solubility: soluble
ProJanta Shine Wet Look Floor Polish is a high solids polymer floor sealer and polish formulated to create a deep “wet look” shine with excellent slip resistance.
ProJanta Shine Wet Look Floor Polish is a high solids polymer floor sealer and polish formulated to create a deep “wet look” shine with excellent slip resistance. Its thermoplastic polymer film becomes tougher and shinier each time it’s buffed, helping protect floors and extend polish life. The first coat seals the floor, the second delivers gloss, and a third coat can be applied for superior high gloss. Suitable for PVC, linoleum, rubber, sealed cork/wood, thermoplastic floors, asphalt, terrazzo, marble and stone.
Instructions for use
- Thoroughly clean the floor and strip previous polish layers
- Allow the floor to dry fully
- Apply a thin coat using a polish applicator or clean lint-free mop
- Allow to dry, then apply a second thin coat once dry
- Burnish for best results
- Apply a third coat if a higher gloss level is required
SHINE WET LOOK POLISH
Please be aware pH values may be approximated on a scale between two values, this table uses the most acidic value provided by manufacturer. Please refer to the provided Safety Data Sheet, or specification table below for approximate pH values. For diluted values, please refer to the SDS/COSHH document below.
Health & safety
- Ingestion: Do not induce vomiting. Rinse mouth and drink plenty of water (200–300ml). Do not give anything to drink if unconscious. Get medical attention immediately.
- Skin contact: Wash thoroughly with soap and water. Get medical attention if irritation persists after washing.
- Eye contact: Flush with plenty of water for up to 15 minutes. Remove contact lenses and hold eyes open. Get medical attention if discomfort continues.
- PPE required: Eye goggles and gloves
Storage
- Store in a cool, well-ventilated place
Where to use / Suitable for
- Floors requiring a high-gloss wet look finish and durable protection
- Suitable surfaces: PVC, thermoplastic, linoleum, rubber, sealed cork, sealed wood,
- asphalt, terrazzo, marble and stone
| Brand | ProJanta |
|---|---|
| Colour | White |
| Litreage | 5 LTR |
| Product Weight | 1 |










