SELDEN | ACT TOILET CLEANER | H05
- Concentrated toilet and lavatory cleaner
- Kills germs, odours and bacteria at source
- Removes limescale, organic deposits, grease and body oils
- Biodegradable and phosphate free
ACT Toilet Cleaner is a concentrated liquid toilet cleaner designed to kill germs, remove limescale and dissolve organic deposits.
Available in 1 or 5 Litre containers
CT Toilet Cleaner and Descaler is a concentrated liquid lavatory cleaner formulated to kill germs, remove limescale and dissolve organic deposits from toilets, urinals and sanitary ware. Safe for use on stainless steel, its advanced formula dissolves organics and scale while killing odours and bacteria at source, leaving a fresh bouquet fragrance.
It can also be used on shower areas to remove grease, body oils and scale, and on swimming pool surrounds to remove algae and slime.
The formula is biodegradable and phosphate free.
ACT TOILET CLEANER
Please be aware pH values may be approximated on a scale between two values, this table uses the most acidic value provided by manufacturer. Please refer to the provided Safety Data Sheet, or specification table below for approximate pH values. For diluted values, please refer to the SDS/COSHH document below.
Where to Use / Suitable For
Suitable for toilets, urinals, sanitary ware, shower areas, stainless steel and suitable hard surfaces. Can also be used on swimming pool surrounds to help remove algae and slime and restore cleaner, safer surfaces.
Specification
- Composition: Advanced blend of sulphamic and citric acids with cationic and nonionic surfactants and stabilisers
- Appearance: Clear liquid
- Colour: Royal blue
- Viscosity: 98 centistokes
- S.G.: 1.054
- pH: <1
- Activity: 16%
- Odour: Fresh modern bouquet type
- Stability: Below 0°C
- Biodegradability: Fully biodegradable to European specification
- Shelf Life: Two years minimum in unopened containers at ambient temperatures
Instructions for Use
For toilet bowls and heavy soiling, remove water from the bowl and spread product evenly, paying particular attention to under the rim and water inlets. Use a toilet brush to spread the chemical thoroughly, then flush the toilet after cleaning and rinse the brush.
For regular cleaning and sanitising, apply evenly above the water line and around the rim. Leave for 10-15 minutes before flushing.
For urinals, apply directly to the urinal surface with a toilet brush, agitate as necessary to remove stubborn stains, then flush and rinse the brush.
For hard surfaces, dilute 1 part product to 40 parts cold or hand-hot water. Wash the surface with this solution, then rinse thoroughly with clean water.
Surface Safety
Due to the highly acidic nature of this chemical, do not use on acid-sensitive surfaces such as marble or terrazzo.
Do not leave neat product in prolonged contact with surfaces. Always rinse off after use.
| Brand | Selden |
|---|---|
| Colour | Blue |
| Fragrance Type | FRESH |
| Application | Bulk Refill |
| pH | 1 |










